As the cold weather sets in, we all want to make sure our homes stay warm without sending our energy bills through the roof. At Milford Window Company, we’re committed to providing high-quality windows that keep your home comfortable all winter long—without cranking up the heating. However, to ensure they’re working at their best, a little winter TLC is needed. Here are three easy tips to keep your windows in top condition and maximise their efficiency throughout the colder months.
Here’s everything you need to know about phasing your window and patio door installation, along with the benefits and potential considerations to keep in mind.
1. Perform a Quick Window Check
Before winter hits, give your windows a thorough inspection. Look for any gaps, cracks, or damaged seals around the window frame. Drafts are a sign that something’s amiss. A simple way to check is by holding a candle near the edges of the window on a windy day—if the flame flickers, you’ve got a draft!
For any small gaps, caulk or weatherstripping can work wonders. If you notice larger issues, or your windows have gaps left by the installer, don’t hesitate to contact the company for proper repairs.
Top tip: If you notice broken glass, local glass repair services like Addisons Glass in Guildford, Surrey can help.
2. Clean Your Windows and Frames
Keeping your windows clean isn’t just for aesthetics—it also helps with energy efficiency! Dirty windows can trap cold air and make your home feel chillier. Use a soft vacuum attachment to remove dirt from the frames, then wash them with warm, soapy water. Don’t forget to dry them thoroughly! For the glass, a simple squeegee and warm soapy water is all you need.
Pay attention to the window rebates and edges as well. Clean them with a damp cloth and finish off with a silicone spray to keep them in good shape.
Top tip: Use a lint-free cloth, such as an old cotton t-shirt or microfibre, to avoid leaving dust and dirt behind.
3. Watch Out for Condensation
When it’s cold outside and warm inside, condensation is likely to form on your windows. This moisture can cause damage over time, including mould, rotting seals, and degraded paint. If you see condensation forming, wipe it away with a dry cloth, then let some fresh air circulate by slightly opening your windows.
If your windows have trickle vents, open them to allow air circulation without letting in too much cold. And while heavy curtains are great for keeping heat in, they can trap moisture on your windows, so be sure to monitor condensation closely.
If condensation persists or you see it forming between your double or triple-glazed windows, it may indicate that the seal has failed, which affects insulation.
The good news?
Double and triple-glazed windows with low-emissivity glass reflect heat back into the room, reducing the likelihood of condensation forming on the window surface. This results in a warmer, more energy-efficient home!
